Made by Anthracite · Apparel

The Hoodie

Heavyweight. Hood up, head down.

$88· founding-drop price

The Hoodie is the heaviest thing we sell that isn't metal. 480 gsm French terry, garment-dyed to the same deep black as the anodize, cut relaxed with a hood that actually stands. It is built like the rest of the line: few parts, every one of them considered.

The details carry the system. The drawcords are flat, matte, and tipped with machined anodized aluminum — the one place the metal shop touches the sewing floor. The kangaroo pocket is set low and deep. The cuffs and hem are ribbed tight, so the shape holds when you push the sleeves up.

No print, no puff logo, no contrast stitch. The same tonal mark as the tee, in the same place as the etched mark on the metal. Wear it over the kit and everything matches, which was always the point.

Pick a size — we confirm it by email before the first run ships.

1

Reserved from the founding drop. No charge today — we email you before anything ships.

01

480 gsm French terry

A genuinely heavyweight knit with loopback interior — structure in the body, softness against the skin.

02

Anodized aluminum cord tips

The drawcords end in machined, matte-anodized aluminum tips — the metal shop's signature on the soft goods.

03

Garment-dyed to match

Dyed as a finished piece against the anodize standard, so the hoodie and the hardware read as one black.

04

A hood that stands

Double-layered hood with enough body to hold its shape up or down — no collapsed, flimsy drape.

05

Tonal mark only

One tone-on-tone mark at the chest. Nothing else on the outside.

Fabric480 gsm French terry, loopback
DyeGarment-dyed matte black, enzyme washed
HardwareMachined anodized-aluminum cord tips
PocketKangaroo, set low and deep
FitRelaxed, ribbed cuffs and hem
SizesS – XL
GuaranteeSeams repaired or replaced free in year one
  • — The Hoodie
  • — Spare drawcord with aluminum tips
  • — Recycled mailer, no plastic

Machine wash cold, inside out. Hang dry — 480 gsm holds heat in a dryer and will shrink. Remove the drawcords first if you machine dry against our advice. The aluminum tips need nothing.

A hoodie is the most-worn object most people own, and almost none of them are made to match anything. Ours is dyed against the anodize standard and tipped with the same machined aluminum as the kit, made with a cut-and-sew partner held to our spec. It is the system, worn.

Added to your kit